LG-Ericsson iPECS-MG Mobile Extension


Here is the configuration that you will need to set the iPECS-MG Mobile extension feature. Also how the user can enable or disable this feature from his phone.

iPECS-MG Mobile Extension PBX Configuration

A mobile phone may be registered to a station allowing the mobile phone to place and receive calls through the system. DID calls are sent to the user’s Phone and the active registered mobile phone simultaneously.

Mobile Attributes (PGM236)

You can set the attributes for your mobile phone, the emulation of the flash button and the input time.

Mobile Attributes PGM236

Station DN Attributes (PGM132)

For every station you can enable or disable this feature. By default it is enabled.

Station DN Attributes PGM132

Mobile Extension Number Attribute (PGM146)

Here you need to setup the mobile access number for the extension and the number that is linked to that extension.

Number is the number that will be dialed when this feature is activated. You should add 9 for dialing out or your group access code.

CLI is the Caller-ID number for the mobile phone that is linked to that extension.

Mobile Extension Number Attribute PGM146

User Operations

To activate a registered mobile extension from the user’s station

  1. Press the [PGM] button.
  2. Dial 51 {Mobile Extension code}
  3. Dial mobile phone index (1 or 2).
  4. Dial digit ‘1’ to activate, ‘0’ to deactivate.
  5. Press the [SAVE] button.

To register a mobile phone number

  1. Press the [PGM] button.
  2. Dial 52 {Mobile Extension Registration code}.
  3. Dial mobile phone index (1 or 2).
  4. Dial the mobile phone number with CO access code.
  5. Press the [SAVE] button.

To place a call from the mobile extension using the system

  1. Dial the DID number of the station, the system will check the CLI information, answer the call and the user will receive intercom dial tone.
  2. Place internal or external call as normal.

To Transfer a call from the mobile extension using the system

  1. Dial {Mobile Flash code}.
  2. Dial the desired extension, the call is transferred and the mobile phone returns to idle.

NOTE: The mobile phone may reconnect by dialing the {Mobile Flash Code}.



5
Leave a Reply

avatar
5 Comment threads
0 Thread replies
0 Followers
 
Most reacted comment
Hottest comment thread
5 Comment authors
Tom SmithMarkmyshiGuestTom Smith Recent comment authors
  Subscribe  
newest oldest most voted
Notify of
Tom Smith
Guest

This is a good blog; really it helped me to enhance my knowledge about LG Ericsson IPECS. The information is apt and well written, thanks for sharing. You can even check out our website for some new information on LG Ericsson IPECS.

Tom Smith
Guest

This is a good blog; really it helped me to enhance my knowledge about LG Ericsson IPECS. The information is apt and well written, thanks for sharing. You can even check out our website for some new information on LG Ericsson IPECS.

Guest
Guest
Guest

nice post,,,
virgin mobiles

myshi
Guest
myshi

nice post,,sony mobiles

Mark
Guest
Mark

Hi Nikola, Great post and got me so far but i seem to have an issue with the call from Mobile into the system, I am supposed to be able to call my DID from the registered number and then be able to place a call out through the system but whenever I try to dial a number after connecting it terminates the call :( any help would be appreciated!

Thanks,
Mark

Advertisement