Home » Tag Archives: Cisco

Tag Archives: Cisco

Cisco ASA Failover Configuration

Cisco

This tutorial is for configuring Cisco ASA Failover into Active/Standby mode, assuming your primary Cisco ASA is configured and working. Primary Cisco ASA Setup your failover interface on Primary Cisco ASA enable config t failover lan unit primary interface gigabitEthernet 0/3 no shutdown Assign the failover IP Address on your Primary Cisco ASA failover lan interface FAILOVER gigabitethernet0/3 failover interfaces ...

Read More »

Cisco ASA NAT Migration

Cisco

Since ASA version 8.3 Cisco brings a number of changes in how NAT is processed. Cisco ASA NAT migration is essential if you want to upgrade your firmware. There are two things you need to know: All NAT is built around objects, this allows for IP`s to be changed and objects to be renamed much easier then previously. Access lists ...

Read More »

Mikrotik to Cisco ASA IPsec VPN

mikrotik-cisco

We needed to setup IPsec VPN for a client with a remote location that already had Cisco ASA. So, here is a Mikrotik to Cisco ASA IPsec howto. Tutorial Scenario Cisco ASA site WAN: 1.1.1.2/30 (outside) LAN: 192.168.2.1/24 (inside) Mikrotik site WAN: 1.1.1.1/30 (ether1) LAN: 192.168.1.1/24 (ether2) Cisco ASA to Mikrotik configuration Launch the VPN configuration wizard on your Cisco ...

Read More »