Setting Mikrotik as IPSec Concentrator

Mikrotik_logo

This tutorial is on setting Mikrotik as IPSec concentrator. Road-Warriors will be able to establish secure IPSec connection using the ShrewSoft VPN client. Setting Mikrotik IPSec parametars Since Road-Warriors will connect from different locations we need to set peer with address 0.0.0.0/0 and automatically generate polixy /ip ipsec peer add address=0.0.0.0/0 auth-method=pre-shared-key exchange-mode=main\ secret=123456 hash-algorithm=md5 enc-algorithm=3des generate-policy=yes Make sure that ...

Read More »

Install OpenERP 6.1 on Debian Squeeze

OpenERP

You can always install the latest .deb files from OpenERP, but in this tutorial we will explain how to install OpenERP 6.1 manually from the latest build. Prepare your Debian server Create openerp user that will be used for running the OpenERP application adduser --system --quiet --home=/opt/openerp --gecos 'OpenERP' --group openerp Install PostgreSQL database server and add openerp as a postgres ...

Read More »

Simple Linux Firewall

netfilter-logo

I was looking for a simple Linux firewall script for my Linux box, but every script that i come across had a lot of wizards and too complex to understand. Simple Linux firewall script I’m going to explain how to add this script on startup on Debian Linux. Since iptables initscript is deprecated we need to put this script in /etc/init.d ...

Read More »

VirtualBox 4.2 and phpVirtualBox on Debian

virtualbox-logo

With this tutorial we are going to explain how to install VirtualBox 4.2 and phpVirtualBox for remote management on Debian Linux. Installing VirtualBox 4.2 We need to add the Debian repository for add the public key and install VirtualBox 4.2 vi /etc/apt/sources.list deb http://download.virtualbox.org/virtualbox/debian squeeze contrib non-free Run the following commands: wget -q http://download.virtualbox.org/virtualbox/debian/oracle_vbox.asc -O- | apt-key add - apt-get update ...

Read More »

Setup nginx Reverse Proxy

nginx-logo

Here is how to setup nginx reverse proxy with Apache web server for PHP files, but using nginx to deliver static files and also set browser cache. nginx reverse proxy configuration If you don’t have nginx installed on your system type the following commands apt-get install nginx update-rc.d nginx defaults /etc/init.d/nginx restart Add the following proxy parameters in /etc/nginx/proxy_params which we ...

Read More »

iPECS to Skype SIP Integration

iPECS-LIK-Skype-featured

LG-Ericsson PBX’s are capable to connect to Skype for low cost VoIP calls using the Skype Connect. This is a simple howto connecting iPECS to Skype.   Skype Connect Setup Create a Skype Manager Account (https://manager.skype.com) and login. Buy Skype credits. Create a SIP profile (https://manager.skype.com/features/sip) and click on view profile. Click on Calling channels and buy the so many ...

Read More »

ipLDK Hunt Group explained

Unified Call Distribution Group

In PBX systems stations can be grouped so that incoming calls may be routed to an idle station in the group. Here are the Hunt Group explained for ipLDK and other LG-Ericsson PBX systems. Hunt Group Several VMIB announcements may be provided to the Hunt group. If a call is not answered until the 1st Announcement Timer expires. The second announcement ...

Read More »

Aria SOHO Door Phone Installation

Aria SOHO Feature

LG-Ericsson Aria SOHO door phone feature can be used on it’s 2 relays which means you can have maximum of 2 door phones. Here is a sample howto. Aria SOHO Door Phone A convenient intercom box can be connected to the system. The intercom box can receive page announcements and intercom calls. And the intercom box can signal assigned stations ...

Read More »

Mikrotik to Cisco ASA IPsec VPN

mikrotik-cisco

We needed to setup IPsec VPN for a client with a remote location that already had Cisco ASA. So, here is a Mikrotik to Cisco ASA IPsec howto. Tutorial Scenario Cisco ASA site WAN: 1.1.1.2/30 (outside) LAN: 192.168.2.1/24 (inside) Mikrotik site WAN: 1.1.1.1/30 (ether1) LAN: 192.168.1.1/24 (ether2) Cisco ASA to Mikrotik configuration Launch the VPN configuration wizard on your Cisco ...

Read More »

LG-Ericsson iPECS-MG Mobile Extension

iPECS-MG Logo

Here is the configuration that you will need to set the iPECS-MG Mobile extension feature. Also how the user can enable or disable this feature from his phone. iPECS-MG Mobile Extension PBX Configuration A mobile phone may be registered to a station allowing the mobile phone to place and receive calls through the system. DID calls are sent to the ...

Read More »

Enable chat on Zimbra 7

VMware Zimbra

By default, Zimbra 7 has the chat feature disabled, Here is a simple way to enable chat on Zimbra 7. This feature will not be available in newer versions. Enable XMPP protocol on Zimbra server Login as zimbra username and enable the XMPP protocol on your Zimbra server. su - zimbra zmprov -l -v mcf zimbraXMPPEnabled TRUE Enable chat feature ...

Read More »

My Mikrotik Initial Setup

Mikrotik_logo

This is my Mikrotik initial setup configuration on every new Mikrotik device that i install. With this configuration you will secure your router, create internet connection and share it with rest of the network . Change the admin password First thing i do i changing the admin user password. and also add new username with full privileges. /user set admin password=putpasshere ...

Read More »

Meridian Option 11 Programming Manual

Meridian Option 11

This is a short introduction into programming a Meridian Option 11 PBX. I needed to program an old Nortel Meridian Option 11 PBX for a client that was not ready for a PBX upgrade. The Meridian PBX’s software divides information into LOADS. Each Load has a specific function. For example, LD 20 is where you can print information about phones. ...

Read More »

LG-Ericsson Aria SOHO – First Time Installation

LG-Ericsson Aria SOHO

If the cable wiring is all done, LG-Ericsson Aria SOHO can be installed in under an hour. Here is a simple manual how to do it right. Aria SOHO hardware settings and DIP swithes Before starting up and installing additional parts in the Aria SOHO system open the cover of the AR-BKSU (main cabinet) and put the SW2 to ON ...

Read More »

OpenERP Reverse Proxy using nginx Server

OpenERP

OpenERP Reverse Proxy installation guide. With this few steps I am are going to explain how to use nginx to secure your OpenERP 6.1 installation. This commands are based on Debian Squeeze, but most of the configuration files will work on any Linux Operating System. Installing nginx On your server console to install nginx type: apt-get install nginx Create self ...

Read More »