Home » Telephony » iPECS-MG Training – H.323 Line Feature

iPECS-MG Training – H.323 Line Feature

Power Point presentation for H.323 Line Feature of LG-Ericsson iPECS-MG. This is Part 5 from iPECS-MG Training Materials.


iPECS-MG H.323 Line Feature — Presentation Transcript

  1. H.323 Line FeaturesBusiness Enabled Communications
  2. Contents• H.323 Call• Voice Networking• Transit In/Out• Fail over PSTN(ARS)
  3. H.323 CO Feature
  4. H.323 Call Direct Call MPB1 IP : 192.168.123.117 STA 2XXX 1) CO Group Assign for H.323 Call • CO Line Attribute(PGM160) Service Type : DID for incoming call Outgoing /Incoming CO Group for Voice Networking : Group 3 • CO Line Attribute (PGM 161) Service Mode : H.323 2) H323 Routing Setting • H.323 Routing Table (PGM 360) Digit : Prefix Digit for Outgoing H.323 Call – 2 Dest IP Addr : IP Address for H.323 Call Max. 50 Index for each CO Group. • H.323 Incoming Attribute (PGM 362) From IP Address : IP address for Incoming H.323 Call Incoming CO Group Number : Group No for From IP. Max 50 Index for a system
  5. VoiceNetworking
  6. Voice Networking IP Networking Solution iPECS-MG 300/100 Router iPECS Router Office B BLF Manager Office A Internet ipLDK Router Office C
  7. Voice Networking Voice Networking Function  Basic Call (Net Station Call)  Transit In/Out  Net Line Identification  Net Name Identification  Net 3rd Party Conference  Net Call Transfer By Reroute  Net Call Completion (Call Back)  Net Call Offer  Net Call Intrusion  Net Call Forward (register/cancel/service)  Net Do Not Disturb  Net Message Wait Indication (MWI)  Centralized VMS (Voice Mail system)  Centralized ATD Service (CAS)
  8. Voice Networking Basic Call System A System B MPB1 IP : 192.168.10.1 MPB1 IP : 192.168.10.2 STA 1XXX STA 2XXX 1) Assign Numbering Plan for Remote System (System B) • System Numbering Plan(PGM111) : Assign remote number (Prefix 2, Digit3) 2) CO Group Assign for Networking Call • CO Line Attribute(PGM160) Service Type : DID for incoming call Outgoing /Incoming CO Group for Voice Networking : Group 3 • CO Line Attribute (PGM 161) Service Mode : H450/QSIG(E1) 3) NET Enable • Networking Attr (PGM 320) Net Enable : ON CNIP/CONP : ON
  9. Voice Networking Basic Call System A System B MPB1 IP : 192.168.10.1 MPB1 IP : 192.168.10.2 STA 1XXX STA 2XXX 4) Assign Networking Numbering Plan for Remote System • Networking Numbering(PGM321-1) : Assign own system number (e.g. 1999) An unused number from station range (1XXX=1000~1999) To be easy, choose the last number from station range • Networking Numbering(PGM321-2) : Assign remote system number Numbering Plan Type : NET Numbering Plan Code (2XXX, X : 0~9) Outgoing CO Group No : 03 CPN : MPB IP address for remote system 5) Programming for System B is the same as above. Related additional ADMIN • IP Address Plan (108) • VOIB Board Attributes (305) • H.323 Call Attributes (361)
  10. Practice Basic call System A System B MPB1 IP : 10.10.10.1 MPB1 IP : 10.10.10.2 STA 1000~1099 STA 1100~1199 1) Assign Numbering Plan for Remote System (System B) • System Numbering Plan(PGM111) : 2) CO Group Assign for Networking Call • CO Line Attribute(PGM160) Service Type : DID Outgoing /Incoming CO Group for Voice Networking CO Line Attribute (PGM 161) Service Mode : H450/QSIG(E1) 3) Assign Networking Numbering Plan for Remote System Networking Numbering(PGM321-2) : Assign remote system number Numbering Plan Type : NET Numbering Plan Code (10XX or 11XX) Outgoing CO Group No CPN : MPB IP address for remote system
  11. Voice Networking Transit Out Call PSTN or ISDN System A MPB1 IP : 192.168.10.1 STA 1XXX System B Transit code : 4 MPB1 IP : 192.168.10.2 STA 2XXX SYSTEM A PSTN Code 801 1) Assign Numbering Plan for Transit out code • System Numbering Plan(PGM111) : Assign Transit out number (Prefix 4, Digit0) 2) Assign Networking Numbering Plan for Transit out code • Networking Numbering(PGM321-3) : Assign transit out number Numbering Plan Type : Transit Out Numbering Plan Code : 4 Outgoing CO Group No : 03 AND Digit : 801 (CO Grp Access code for System B) Digit Repeat : On (To send AND Digit) CPN : MPB IP address for remote system
  12. Voice Networking Transit Out Call PSTN or ISDN System A System B MPB1 IP : 192.168.10.1 MPB1 IP : 192.168.10.2 STA 1XXX STA 2XXX Transit code : 4 PSTN Code 801 SYSTEM B 1) CO Group Access code • CO Group Access code Attr(PGM180) : Set CO Group Access code (801) 2) CO COS • CO COS (PGM177) Assign COS : COS 1 about incoming IP CO line. 3) CO to CO Call Attributes • CO to CO Attributes (PGM179) Incoming CO Group – IP CO Line Group Outgoing CO Group – PSTN CO Group Incoming/Outgoing Direct : Enable
  13. Voice Networking Centralized Voice Mail System A System B MPB1 IP : 192.168.10.1 MPB1 IP : 192.168.10.2 STA 1XXX STA 2XXX Station Group : 2620 (Voice Mail Group) SYSTEM A 1) Assign Networking Numbering Plan for Remote System 2) Networking Numbering(PGM321-2) : Assign remote system number Numbering Plan Type : NET Numbering Plan Code (2XXX, X : 0~9) Outgoing CO Group No : 03 CPN : MPB IP address for remote system 3) Net Voice Mail Group Number (PGM320) : 2620 SYSTEM B 1) Assign Station Group as Voice Mail Group (PGM200) 2) Change numbering plan of voice mail group for remote system Station Group Number (PGM 115) Change 620  2620 (match it with 2XXX for net numbering plan in System A
  14. Voice Networking BLF & DECT Mobility System A System B MPB1 IP : 192.168.10.1 MPB1 IP : 192.168.10.2 STA 1XXX STA 2XXX BLF Server IP : 192.168.123.112 Net BLF Programming 1) BLF Usage (PGM320)  ON 2) BLF Server IP Address and Port Setting (PGM320) • TCP Port / UDP Port • BLF Manager IP Address : 192.168.123.112 DECT Mobility 1) BLF Destination System IP Address/Port (PGM321) • BLF Destination System IP address : 192.168.10.2/1 in system A/B • BLF Destination System Port : 9000 in System A/B
  15. Fail over PSTN (ARS)
  16. Fail over PSTN CO Line ARS PSTN or ISDN System A MPB1 IP : 192.168.123.30 STA 1XXX SYSTEM A CO Group Assign for H.323 Call • CO Line Attribute(PGM160) Service Type : Normal or DID for incoming call Outgoing /Incoming CO Group for H.323 Call : Group 5 • CO Line Attribute (PGM 161) Service Mode : H.323 ARS Service Enable • Outgoing CO Line Attributes(PGM171) ARS Service : ON • CO Group Access Code(PGM180) ARS Service : ON ARS Digit 1 : 802 ARS Digit 1 Usage : User Converted Digits or Use Original Digit
  17. Fail over PSTN Check Message Option PSTN or ISDN System A MPB1 IP : 192.168.123.30 STA 1XXX SYSTEM A Check Message Option • H.323 Incoming Attributes(PGM 362) From IP Address : 192.168.123.35 Check Message Option : ON ⇒ This ‘From IP Address’ matched ‘Destination IP Address’ at PGM 360. ⇒ When try outgoing call, destination IP address state will be check by ‘From IP Address(PGM362)’. ⇒ need RESET for apply this ADMIN Check Message Period • H.323 Check Message Info(PGM364) Retry Count : 3 times Session Check Timer : 30 seconds

LG-Ericsson: http://www.ericssonlg.com

About Nikola Stojanoski

System Administrator and Developer. Giving back to the community by blogging about my problems, solutions and practical howto's.
  • Hi Vion

    I been looking for solution last 2 weeks on the ipecs-mg but no solution.
    I have laptop connected to iPECS-MG via umanaged 5 port switch. I used 10.10.10.101 and 255.255.255.0 and 10.10.10.254 configured in my laptop network card. But it say connect but no network access (unidentified network). Secondly when open key 10.10.10.1 in IE, Chrome andMozilla bt the web admin page does not show! i tried unticking TLS1.0, disable firewall, disabe my avira and so one but to no avail. then i tried troubleshoot and windows prompt says that “The remote device or resource won’t accept connection”

    please help